APEM Inc. A0102Y
IN STOCK
: 36
Min. : 1
Mult. : 1
Not available to buy on line? Want the lower wholesale price? Please sendRFQ, we will respond immediately
A0102Y Tech Specifications
| Category | Configurable Switch Components - Body | |
| Manufacturer | APEM | |
| Factory Lead Time | 17 Weeks | |
| Surface Mount | NO | |
| Mounting Feature | PANEL MOUNT | |
| Actuator Material | POLYBUTYLENE TEREPHTHALATE | |
| Center Contact Plating | GOLD OVER SILVER | |
| Center Contact Material | BRASS | |
| End Contact Material | BRASS | |
| End Contact Plating | GOLD OVER SILVER | |
| ActuatorColor | RED | |
| ElectricalLife | 50000 Cycle(s) | |
| Insulation Materials | POLYBUTYLENE TEREPHTHALATE | |
| Series | A01 | |
| Part Status | Active | |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) | |
| ECCN Code | EAR99 | |
| Type | Momentary | |
| Max Operating Temperature | 55°C | |
| Min Operating Temperature | -20°C | |
| Voltage - Rated DC | 12V |
| Current Rating | 6A | |
| Voltage - Rated AC | 250V | |
| Body Length or Diameter | 30.7086mm | |
| Body Breadth | 18.0086 mm | |
| Actuator Type | Pushbutton, Rectangular | |
| Switch Function | DPDT | |
| Panel Cutout Dimensions | 16mm (Round) | |
| Contact Resistance | 0.01mOhm | |
| Insulation Resistance | 50000000Ohm | |
| Dielectric Withstanding Voltage | 750VDC V | |
| Illumination | Non-Illuminated | |
| Contact Current(AC)-Max | 6A | |
| Contact (AC) Max Rating R Load | 6A@250VAC | |
| Contact Timing | BREAK-BEFORE-MAKE | |
| Contact Function | ON-(ON) | |
| Compatible Series | Apem, A01 (1 or 2 Pole) | |
| Requires | Contact Block(s), Lens | |
| Actuator Length | 0.394 inch | |
| RoHS Status | ROHS3 Compliant | |
| Lead Free | Lead Free | |
| Ratings | IP65 |
Select at least one checkbox above to show similar products in this category.
A0102Y Documents
Download datasheets and manufacturer documentation for A0102Y
- DatasheetsA01 Pushbutton Series Datasheet
- Environmental InformationRoHS Cert
Index :
0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ