Sanyo Denki SanMotion Products SH2145-5641P Stepper Motors
Hybrid 400 mA 1.42 / 10
IN STOCK
Min. : 1
Mult. : 1
Not available to buy on line? Want the lower wholesale price? Please sendRFQ, we will respond immediately
SH2145-5641P Tech Specifications
| Category | Stepper Motors | |
| Manufacturer | Sanyo | |
| Weight | - | |
| Mounting Hole Spacing | 0.453" (11.50mm) | |
| Mfr | Sanyo Denki SanMotion Products | |
| Package | Box | |
| Product Status | Active | |
| Voltage Rated | 24VDC | |
| CoilResistance | 19 Ohms | |
| Base Product Number | SH2145 | |
| Dimensions | 68.8 mm x 14 mm x 11 mm | |
| Voltage, Rating | 24 V | |
| Minimum Holding Torque | 0.01 N-m | |
| Series | SH | |
| Operating Temperature | -10°C ~ 50°C | |
| Size / Dimension | Square - 0.551" x 0.551" (14.00mm x 14.00mm) |
| Type | Hybrid | |
| Current Rating (Amps) | 400 mA | |
| Current Rating | 400 mA | |
| Termination Style | Wire Leads | |
| Approval Agency | CE, cURus, TUV | |
| Number of Channels | 1 ChannelChannel | |
| Accuracy | - | |
| Product Type | Stepper Motors | |
| Coil Type | Bipolar | |
| Step Angle | 1.8° | |
| Steps per Revolution | 200 | |
| Torque - Holding (oz-in / mNm) | 1.42 / 10 | |
| Features | - | |
| Rotor Inertia | 0.03gcm2 | |
| Diameter - Shaft | 0.157" (4.00mm) | |
| Length - Shaft and Bearing | 0.591" (15.00mm) |
Select at least one checkbox above to show similar products in this category.
Index :
0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ