- All Products
- /
- Audio Products
- /
- Accessories
| Image | Part # | Manufacturer | Description | Pricing | Quantity | RoHS | Package / Case | Supplier Device Package | Base Product Number | Brand | Factory Pack QuantityFactory Pack Quantity | Manufacturer | Mfr | Package | Product Status | RoHS | Operating Temperature | Series | Size / Dimension | Tolerance | Number of Terminations | Temperature Coefficient | Resistance | Composition | Power (Watts) | Subcategory | Cable Length | Product Type | Features | Product Category | Height Seated (Max) | Ratings |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
  | Mfr. Part #BLUMTR-BK-FA-20Elecinsight Part #17073-48-BLUMTR-BK-FA-20 | Applied Motion |
The BLUMTR-BK-FA-20 feedback cable connects the motor power and holding brake leads of an M Series servo motor to the corresponding connections of an Applied Motion servo drive.
Datasheet
Compare
| Min.:1 Mult.:1 | Wide 1206 (3216 Metric), 0612 | - | WK73R2B | - | - | - | KOA Speer Electronics, Inc. | Tape & Reel (TR) | Active | - | -55°C ~ 155°C | WK73R | 0.063 L x 0.126 W (1.60mm x 3.20mm) | ±0.5% | 2 | ±100ppm/°C | 13.3 kOhms | Thick Film | 0.75W, 3/4W | - | - | - | Automotive AEC-Q200, Moisture Resistant | - | 0.028 (0.70mm) | AEC-Q200 | ||
| BLUMTR-BK-FA-20 | ||||||||||||||||||||||||||||||||
| | Mfr. Part #3004-263Elecinsight Part #17073-48-3004-263 | Applied Motion |
The 3004-263 encoder extension cable is designed for use with STM17R and STM23R integrated steppers with incremental encoders mounted to the rear shafts. This includes the following integrated stepper part numbers:
Datasheet
Compare
| Min.:1 Mult.:1 | - | - | - | Applied Motion | 1 | CORNELL DUBILIER | - | - | - | Details | - | - | - | - | - | - | - | - | - | Cable Assemblies | 3 ft | Sensor Cables / Actuator Cables | - | Sensor Cables / Actuator Cables | - | - | ||
| 3004-263 | ||||||||||||||||||||||||||||||||
| | Mfr. Part #YAA ENCODERElecinsight Part #17073-48-YAA ENCODER | Applied Motion |
The YAA incremental encoder fits on the rear shafts of HT34 step motors with 3/8” diameter rear shafts. This includes the following motors:
Datasheet
Compare
| Min.:1 Mult.:1 | - | - | - | IDEC | 1 | IDEC | - | - | - | - | - | - | - | - | - | - | - | - | - | Switches | - | Pushbutton Switches | - | Pushbutton Switches | - | - | ||
| YAA ENCODER | ||||||||||||||||||||||||||||||||
| | Mfr. Part #3004-278-5MElecinsight Part #17073-48-3004-278-5M | Applied Motion |
One 3004-278 serial programming cable is required with all SWM24 drive motor models with an RS-232 port. The 3004-278 is used for setup and programming of a drive, but can also be used in streaming serial command (SCL) applications as a permanent connection between the drive and the host device’s RS-232 port.
Datasheet
Compare
| Min.:1 Mult.:1 | - | - | - | Applied Motion | 1 | Applied Motion | - | - | - | Details | - | SWM24 | - | - | - | - | - | - | - | Cable Assemblies | - | Specialized Cables | - | Specialized Cables | - | - | ||
| 3004-278-5M | ||||||||||||||||||||||||||||||||
| | Mfr. Part #MMI-02Elecinsight Part #17073-48-MMI-02 | Applied Motion |
The MMI-02 is an easy-to-use operator interface accessory for Si Programmer™. The MMI-02 connects directly to an i or Si drive’s serial programming port and makes user access of internal Si program parameters a snap. The MMI-02 is also available in a non-backlit version, the
Datasheet
Compare
| Min.:1 Mult.:1 | - | - | - | Applied Motion | 1 | Applied Motion | - | - | - | Details | - | - | - | - | - | - | - | - | - | Input Devices | - | Input Devices | - | Input Devices | - | - | ||
| MMI-02 | ||||||||||||||||||||||||||||||||
| | Mfr. Part #ZAA-ENCODERElecinsight Part #17073-48-ZAA-ENCODER | Applied Motion |
The ZAA incremental encoder fits on the rear shafts of HT23 and HT24 step motors. To order the encoder factory-assembled onto the rear shaft of the motor add the ZAA suffix to the end of the double-shaft step motor part number. For example, order HT23-601D-ZAA to purchase the HT23-601D step motor and ZAA encoder as a single, factory-assembled part number.
Datasheet
Compare
| Min.:1 Mult.:1 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | ||
| ZAA-ENCODER | ||||||||||||||||||||||||||||||||
| | Mfr. Part #3004-190Elecinsight Part #17073-48-3004-190 | Applied Motion |
The 3004-190 Hub/MMI Cable is a replacement cable for SiNet Hub multi-axis controllers and MMI operator interfaces. The cable can be used to connect a SiNet Hub-compatible stepper or servo drive to one of the available ports of a SiNet Hub 444 or 8. It also cable can also be used to connect an MMI-01 or MMI-02 operator interface panel to the PC/MMI port of an Si stepper or servo drive, or the PC/MMI port of a SiNet Hub.
Datasheet
Compare
| Min.:1 Mult.:1 | - | - | - | Applied Motion | 1 | Applied Motion | - | - | - | - | - | - | - | - | - | - | - | - | - | Cable Assemblies | - | Specialized Cables | - | Specialized Cables | - | - | ||
| 3004-190 |
Index :
0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ