SCOTCH-WELD EPOXY ADHESIVE D

Chemicals S/W EPOXY ADH DP-460 NS 37 ML DUO-PAK

SCOTCH-WELD EPOXY ADHESIVE 2

Silicone;potting;blue;self-leveling;1 pint;requires SS4155 primer

8CH Serial 12 Bit, SMD, SOIC20, 186

Wood to Wood Adhesive, Yellow, 60 second set time, ww60, Discontinued Item

ML 11, 4 20 W/SMB, CONT LVL DISP

3M™ Scotchcast Electrical Resin 253 is a 100% solids, two-part, oven-curing, semi-flexible, filled, brown epoxy resin capable of operating continuously at 130(deg)C. the thixotropic nature of this product renders it readily applicable by dipping, extrusion or trowelling in applications where resistance to running or sagging is a requirement. The properly cured product exhibits permanent flexibility, good adhesion, good thermal and mechanical shock resistance and good thermal conductivity. Typical examples of applications where this product can be used are as a conformal coating for coils, transformers, motors, modules, electrical and electronic components or assemblies, and for buttering motor turns. Gel time is 23 min at 120(deg)C.

3M™ Scotchcast Electrical Resin MR283FO75 is a filled, epoxy resin system offering excellent physical, electrical and thermal properties. The filler minimizes shrinkage and stresses, and provides increased thermal conductivity and thermal shock resistance. Gel time is 30 min at 121(deg)C. Applications include impregnation and encapsulation of coils, transformers, motors and other electrical and electronic components.

3M™ Scotchcast Electrical Resin 280 is characterized by a high temperature rating, outstanding physical and electrical stability and superior resistance to moisture. Resin system 280 remains flexible even after prolonged heat aging, while its low viscosity and fine wetting properties allow complete impregnation of fine wires in coils. Resin 280 is well suited to impregnating, potting and encapsulating applications that require superior electrical performance, maximum resistance to moisture and thermal shock resistance. Gel time is 20 min at 121(deg)C.

3M™ Scotchcast Electrical Resin System 235 has permanent semi-flexibility, thermal shock and impact resistance, good electrical and adhesion properties. This low viscosity resin is well suited to a variety of general purpose, Class B applications. Its low viscosity and good wetting characteristics allow complete impregnation of even small coils, and it has the mechanical strength and flexibility needed for high quality insulation of large castings, such as motors, transformers, and coils. Gel time 18 min at 120(deg)C.

3M™ Scotchcast Electrical Resin 3 is characterized by outstanding physical and electrical stability and superior resistance to moisture. Its low viscosity and fine wetting properties allow complete impregnation of fine wires in coils. Resin 3 is well suited to impregnating, potting and encapsulating applications such as coils, transformers, modules, and other electrical and electronic components. Gel time is 21 min at 121(deg)C.

3M™ Scotchcast Electrical Resin 281 is characterized by high temperature and electrical stability and excellent retention of flexibility even after prolonged heat aging. It can be cured at low temperatures, but the optimum properties are obtained with the higher temperature cure schedules. Applications include impregnation and encapsulation of coils, transformers, motors and other electrical and electronic components.

3M™ Scotchcast Electrical Resin 251 is a medium viscosity, rigid, Class F resin system widely used where physical strength and excellent electrical properties at elevated temperatures are required. An easy 1:1 mix ratio and good handling characteristics have contributed to the products popularity.

3M™ Scotchcast Electrical Resin 280 is characterized by a high temperature rating, outstanding physical and electrical stability and superior resistance to moisture. Resin system 280 remains flexible even after prolonged heat aging, while its low viscosity and fine wetting properties allow complete impregnation of fine wires in coils. Resin 280 is well suited to impregnating, potting and encapsulating applications that require superior electrical performance, maximum resistance to moisture and thermal shock resistance. Gel time is 20 min at 121(deg)C.

3M™ Scotchcast Electrical Resin 226 is a rubbery castor-based polyurethane that combines very low viscosity with a good workable pot life and a demold time, at room temperature, of as little as six hours. Resin 226 maintains good electrical properties in both wet and dry environments. It also has long-term heat stability and good toughness. Resin 226 is used for a wide range of electrical and electronic potting and casting applications. It is formulated with materials that have low volatility at room temperature, minimizing toxicity potential. The isocyanate used is not TDI, and does not contain MOCA

3M™ Scotchcast Electrical Resin 208 is a 100% solids epoxy resin system useful for impregnating and encapsulating U.S. Navy motors through frame size 326. Packaged in pre-measured kits, resin 208 protects windings against unusual environmental conditions in applications up to 130(deg)C. Because of the product`s good wetting and impregnating properties, there is little scrap and little need for rework or patching. The preferred curing cycle for all frame sizes is 48 hours at room temperature.

3M™ Scotchcast Electrical Resin 250 has many distinguishing characteristics including its high temperature stability, good electrical and physical properties, and low viscosity. This resin is suggested for use in applications where adhesion, mechanical strength, and good electrical properties at high temperatures are needed. Gel time is 17 min at 121(deg)C.

3M™ Scotchcast Resin 255 meets the flame retardency requirements of Fed. Std. 408, Method 2023.1 and Mil-I-16923G. This product is suggested for use in potting and encapsulating applications where shock resistance and flame retardancy are needed. It is rated for continuous operation at 130(deg)C.

3M™ Scotchcast Electrical Resin 210 is a 100% solids, room-curing, epoxy resin system. It is suggested for insulating and sealing motor-winding end turns and slot sections. The two parts are mixed in a 1:1 ratio by weight. At room temperature the resin has a pot life of 1 to 1 1/2 hours and cures in 24-48 hours. This resin can be applied by spatula or by extrusion. It is useful for a variety of electrical sealing, caulking, filling, and patching applications. Gel time is 30 min at 60(deg) C.