CAN FD: Anything But Automotive Only
Due to higher bandwidth requirements in the automotive field, the CAN (controller area networking) specification was extended for flexible data–rates with a new iteration known as CAN FD.
As Classic Moore’s Law Dims, Heterogeneous Integration Steps Into the Limelight
The internet of things, big data, and artificial intelligence (AI) are fueling a new wave of growth for the semiconductor industry.
Pairing AR/VR with Digital Twins
Digital twins not only provide engineers and designers with real–time data of how a physical asset performs, but they also offer time and cost advantages during the test and developmental stages of both new and existing products.
STMicroelectronics Rad-Hard ICs Target ‘New Space’
Built with low–earth orbit (LEO) in mind, STMicroelectronics’ latest series of radiation–hardened ICs boast a plastic package with a total ionization dose immunity up to 50 krad(Si), enabling next–gen satellites to provide earth observation and broadband internet from the relative safety of LEOs. Hello new space, goodbye old space.
Wide Bandgap Technologies for a New Efficient Industry
Physical limitations prevent current silicon technology from achieving the higher power density, miniaturization, and energy conversion efficiency that the market needs from power products to meet growing environmental concerns.
The network-on-chip interconnect is the SoC
“The network is the computer,” coined by John Gage of Sun Microsystems back in 1984, proved incredibly insightful. This idea is re-emerging, this time within the SoC realm.
AI and the IoT merge to form the AIoT
Technology trends in artificial intelligence (AI) and the IoT have started to merge, a trend that industry has named the Artificial Intelligence of Things (AIoT).
Why network-on-chip has displaced crossbar switches at scale
When the number of elements that need to communicate in a chip is small, a simple crossbar approach to the interconnect function is a possible choice.
Processing Solutions for High-Density PCBs
Designers must consider processing temperatures, producibility, and solder joint integrity of every component as well as higher I/O connectors. This article looks at ways to enable smaller component footprints for high-density PCBs.
How to Model Ground Current of Filter Inductors for MV SiC-MOSFET Converters
Solution Support For 5G VoNR Voice Quality Evaluation
Complete solution for Voice/Audio quality evaluation for 5G SA VoNR, 5G NSA VoLTE, 4G VoLTE, 3G and 2G cellular technologies
Near Field Communication (NFC) Explained: Working and Applications
Near Field Communication (NFC) is evolved from the integration of non-contact radio frequency identification (RFID) and interconnection technology. Devices using NFC technology can exchange data when they are close to each other.
Introduction to Nexperia Automotive-Grade ICs
Electronics in the automotive industry require accuracy, durability and complete reliability. All systems, including the engine control and modern driver assist, are based on parts that have to endure both high temperature and electrical interference, as well as extended durability of operation.
ASIC vs FPGA Comparison: Performance, Cost, and Design Differences Explained
This article compares Application-Specific Integrated Circuits (ASICs) and Field-Programmable Gate Arrays (FPGAs), two technologies used for creating custom digital circuits.
The Rise of Automotive-Grade SiC/GaN Power Devices in Electric Vehicles
The automotive fast recovery Silicon Carbide (SiC) and Gallium Nitride (GaN) power devices emerge as game-changing technologies.
How to Safely Discharge an AC Capacitor
AC capacitor discharge refers to the process in which a capacitor releases its stored electrical energy in an alternating current (AC) circuit.
Signs of a Bad Camshaft Position Sensor and How to Test it?
A car has a variety of electrical components, one of which is called a camshaft position sensor (CMP). This section will discuss this component, the signs that indicate a problematic camshaft position sensor, and the procedures for doing so.
Symptoms of a Bad Speed Sensor and How to Test It?
Speed sensors are utilized to measure the speed at which devices are spinning. Many vehicles, including automobiles, aerospace vehicles, off-highway and construction equipment, railway vehicles, and military vehicles, require speed sensors.
Current Divider: definition, applications & formula
A current divider is an electrical circuit configuration used to split or divide an input current into multiple branches or paths.
74LS04 Hex Inverter Datasheet(PDF) and Pinout
This article will explain some detailed information about 74LS04 Hex Inverter, including its datasheet, pinout, features and specifications.
C1815 Transistor: Pinout, Features & Specifications
This article gives a comprehensive introduction to the key information of the C1815 transistor
Guide to IC 7408 Logic Gate Chip: Specifications, Applications, and Pinout
The 7408 IC, a crucial component in electronics, features?four logic gates, each with two inputs.