Why the Cost of Energy Is Key to Sustainability
Alex Lidow analyzes the cost of energy and its key points: energy generation, distribution, storage, conversion and usage costs.
GaN Epi Wafer Manufacturing for High-Voltage GaN Devices
Gallium nitride has become the de facto material in third-generation semiconductors. However, making GaN wafers in the quality you need and the thermal resistance you desire are challenges that fabs are still trying to overcome.
How to Decarbonize the Heating of Buildings at Lowest Cost
This article explores how a nation might decarbonize heating of building spaces at the lowest cost, in the most likely and supported way
Saving Stand-by Power in the Smart Home
With IoT, connectivity becomes increasingly important as it allows mantaining proper communication and, as a result, standby consumption is turning into a real challenge.
Wide Bandgap Technologies for a New Efficient Industry
Physical limitations prevent current silicon technology from achieving the higher power density, miniaturization, and energy conversion efficiency that the market needs from power products to meet growing environmental concerns.
How to Model Ground Current of Filter Inductors for MV SiC-MOSFET Converters
Introduction to Nexperia Automotive-Grade ICs
Electronics in the automotive industry require accuracy, durability and complete reliability. All systems, including the engine control and modern driver assist, are based on parts that have to endure both high temperature and electrical interference, as well as extended durability of operation.
ASIC vs FPGA Comparison: Performance, Cost, and Design Differences Explained
This article compares Application-Specific Integrated Circuits (ASICs) and Field-Programmable Gate Arrays (FPGAs), two technologies used for creating custom digital circuits.
The Rise of Automotive-Grade SiC/GaN Power Devices in Electric Vehicles
The automotive fast recovery Silicon Carbide (SiC) and Gallium Nitride (GaN) power devices emerge as game-changing technologies.
How to Safely Discharge an AC Capacitor
AC capacitor discharge refers to the process in which a capacitor releases its stored electrical energy in an alternating current (AC) circuit.
Signs of a Bad Camshaft Position Sensor and How to Test it?
A car has a variety of electrical components, one of which is called a camshaft position sensor (CMP). This section will discuss this component, the signs that indicate a problematic camshaft position sensor, and the procedures for doing so.
Symptoms of a Bad Speed Sensor and How to Test It?
Speed sensors are utilized to measure the speed at which devices are spinning. Many vehicles, including automobiles, aerospace vehicles, off-highway and construction equipment, railway vehicles, and military vehicles, require speed sensors.
Current Divider: definition, applications & formula
A current divider is an electrical circuit configuration used to split or divide an input current into multiple branches or paths.
74LS04 Hex Inverter Datasheet(PDF) and Pinout
This article will explain some detailed information about 74LS04 Hex Inverter, including its datasheet, pinout, features and specifications.
C1815 Transistor: Pinout, Features & Specifications
This article gives a comprehensive introduction to the key information of the C1815 transistor
Guide to IC 7408 Logic Gate Chip: Specifications, Applications, and Pinout
The 7408 IC, a crucial component in electronics, features?four logic gates, each with two inputs.