How to Optimize a Power over Ethernet (PoE) PD Design
This article provides an overview of PoE PD design, including challenges faced by designers implementing these systems, and describes how to optimize the design using an integrated PoE PD and flyback power converter
Motor Drive ICs Use Built-In System Fault Diagnosis to Reduce Field Returns
BridgeSwitch combines high efficiency, design flexibility, enhanced safety, IEC 60335-1, and IEC 60730-1 compliance, with fault diagnosis.
The Importance of the Gate Driver
A good power circuit is not only composed of static devices. The gate driver precedes the electronic switches and ensures them the correct energy to drive them in the best way.
Packaging and Thermal Solutions to Fulfill Trends in Data Centers and Server SMPS
How to meet the design requirements of power supplies using silicon and wide-bandgap switches
What Are the Best Applications for IoT in the New World of IC Power Management?
This article explores internet-of-things battery technology. It describes some of the problems that designers face with power sourcing and provides some solutions.
GaN Power HEMT > 650 V: A Parametric Analysis and Comparison to SiC MOSFET
This article focuses on the detailed parametric analysis and comparison between GaN Power HEMT > 650 V and SiC MOSFETs over the time.
Physical Analysis of the Termination Region on Switching Loss
SiC MOSFETs come with remarkable properties and a unipolar conduction mechanism, which leads to a reduction in their size and improved switching performance.
The Route to Wireless Charging of Electric Vehicles
Wireless charging offers a number of benefits to both electric vehicle owners and infrastructure providers in terms of simplicity, reliability, and ease of use.
Minimizing Second-Order Ripples and DC Capacitance for EV Chargers
EV technology is the future of the automobile industry that continuously sees rapid advancements in battery and fast charger technology.
Dynamic Circuit Model of a SiC VJFET
SiC semiconductors perform considerably well on various parameters like high temperatures, frequency, voltage, and several others.
Next Generation of GaN for Electrification
Gallium nitride is a key component of future energy-efficient electric vehicles and 5G networks. Hexagem, a Lund University–based startup, is developing a new solution at the Swedish research institute Rise testbed ProNano. This solution should contribute to greater electrification and a sustainable future.
Flexible PCBs Enhance EV Design
Trackwise initially developed the capability to manufacture length-unlimited, flexible circuits because of a requirement from Rolls Royce.
Introduction to Nexperia Automotive-Grade ICs
Electronics in the automotive industry require accuracy, durability and complete reliability. All systems, including the engine control and modern driver assist, are based on parts that have to endure both high temperature and electrical interference, as well as extended durability of operation.
ASIC vs FPGA Comparison: Performance, Cost, and Design Differences Explained
This article compares Application-Specific Integrated Circuits (ASICs) and Field-Programmable Gate Arrays (FPGAs), two technologies used for creating custom digital circuits.
The Rise of Automotive-Grade SiC/GaN Power Devices in Electric Vehicles
The automotive fast recovery Silicon Carbide (SiC) and Gallium Nitride (GaN) power devices emerge as game-changing technologies.
How to Safely Discharge an AC Capacitor
AC capacitor discharge refers to the process in which a capacitor releases its stored electrical energy in an alternating current (AC) circuit.
Signs of a Bad Camshaft Position Sensor and How to Test it?
A car has a variety of electrical components, one of which is called a camshaft position sensor (CMP). This section will discuss this component, the signs that indicate a problematic camshaft position sensor, and the procedures for doing so.
Symptoms of a Bad Speed Sensor and How to Test It?
Speed sensors are utilized to measure the speed at which devices are spinning. Many vehicles, including automobiles, aerospace vehicles, off-highway and construction equipment, railway vehicles, and military vehicles, require speed sensors.
Current Divider: definition, applications & formula
A current divider is an electrical circuit configuration used to split or divide an input current into multiple branches or paths.
74LS04 Hex Inverter Datasheet(PDF) and Pinout
This article will explain some detailed information about 74LS04 Hex Inverter, including its datasheet, pinout, features and specifications.
C1815 Transistor: Pinout, Features & Specifications
This article gives a comprehensive introduction to the key information of the C1815 transistor
Guide to IC 7408 Logic Gate Chip: Specifications, Applications, and Pinout
The 7408 IC, a crucial component in electronics, features?four logic gates, each with two inputs.